Who we are
We, TMO Group, own and run the website. We are a company based in Shanghai, China. Our registration number is 91310000569603500A and our registered office is at Room 233 Building 112-113, no. 960 Zhongxing Road, Jing’an District, Shanghai. If you have any questions about this website or these terms, please use the relevant contact details set out on the “Contact Us” page.
The information on this website (the “Website” or “Site”) has been provided by TMO Group and its affiliates or subsidiaries (collectively “TMO Group”) for general information purposes. It does not constitute legal, accounting, tax or other professional advice or services, and it is presented without any representation or warranty as to the accuracy or completeness of the information.
While TMO Group has made every attempt to ensure that the information contained at this Website has been obtained from reliable sources, TMO Group is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information in this site is provided “as is” without warrant or condition of any kind, with no guarantee of the suitability, completeness, accuracy, or timeliness of the publications, articles, videos, podcasts, information, software, products, services and related graphics contained on the website or any results obtained from the use of this information, and without warranty of any kind, express or implied, including, not limited to warranties of performance, merchantability and fitness for a particular purpose. In no event will TMO Group, or TMO Group’s partners, agents or employees be liable to you or anyone else for any decision made or action taken in reliance on the information in this Website or for any consequential, special or similar damages, even if advised of the possibility of such damages.
General Rules of Conduct
You agree that you will not do or assist any third party to do any of the following:
- interfere with another user’s use or enjoyment of our sites;
- other than as explicitly stated herein or as posted elsewhere on our sites, reproduce, distribute, ‘frame’, ‘mirror’, ‘scrape’, republish or retransmit information or content which has been provided by TMO Group or found on our sites without express prior written permission provided by TMO Group;
- access the Site through an unauthorized interface, or in any unauthorized manner;
- take any action that imposes an unreasonable or disproportionately large traffic load on TMO Group systems or infrastructure;
- modify, adapt, sublicense, sell, translate, reverse engineer, disassemble or decompile any portion of our sites, or in any way make our sites available through any third party;
- use any spider, bot, site search/retrieval application, or other device or process to access, search, download, retrieve, index or ‘data mine’ any content or data from our sites, or in any way reproduce or circumvent the navigational structure or presentation of the content available through our sites;
- interfere with or disrupt the proper working or the security of our sites, or any services or activities conducted on or through our sites, including by ‘hacking’ or defacing any portion of our sites;
- introduce any virus, Trojan horse, time bomb, worm, cancelbot, easter egg or other computer program or programming routine that may damage or interfere with the operation of the Site, any content from our sites, any services or activities conducted on or through our sites, or any system;
- unlawfully intercept any data or confidential or personal information; or
- interfere with or disrupt any network connected to the Site.
We or our licensors own all the rights to all the materials contained in the website, and the information the website collects (we refer to all this as the “Content”). This includes patents, copyright, database rights and trademarks.
Use of News Releases, Photographs and Related Content
Publication releases and all photos, videos and any other related multimedia assets (collectively, the “Publication Content”) distributed by TMO Group and posted on our sites may be used for editorial use only, meaning news, factual, educational, public interest, informational and/or historical purposes where a specific and separate agreement with us provides for this permission.
Publication Release Content may not be used for commercial use, meaning advertising, marketing, merchandising, promotional or in any way endorsing goods or services. Except as otherwise provided in these TOU or as otherwise expressly permitted by TMO Group in advance in writing, Publication Content may not be republished, copied, streamed or redistributed without TMO Group’s prior written consent. Where you have been granted written permission to make editorial use of photographs, you must: (i) use each photograph only within the context of the news release with which it was distributed; (ii) include any captions and/or text associated with each photograph, including links, if required in the metadata; (iii) include the credit line set forth in the metadata for each photograph, and if no credit line is included, then provide credit to “TMO Group”. In either case such credit should be appearing immediately adjacent to the News Release Content and in a clear and conspicuous manner comparable to the credit customarily provided to licensors of similar content; (iv) if present, display the copyright notice included in the metadata for each photograph; and (v) follow any other instructions contained in the metadata for each photograph, including without limitation the term of any license period, territory or media restrictions.
In connection with editorial use of photographs, you may never: (i) alter, rotate, manipulate, or crop the photograph in any manner that alters the editorial integrity or essential nature of the photograph; (ii) use the photograph in any manner that is obscene, pornographic, defamatory, or otherwise objectionable; or (iii) violate any laws, regulations or industry codes of practice.
TMO Group is not responsible for Publication Release Content in any way, including without limitation, any copyright, trademark, publicity, privacy, contract or other rights clearance, or the accuracy, timeliness, integrity, quality, safety, appropriateness or other aspect of any information or other content contained therein. You are solely responsible for verifying the accuracy and completeness of Publication Release Content, and for determining if any permissions are necessary to use the Publication Release Content, and, if so, for securing those permissions prior to your use of the Publication Release Content. If you choose to rely on or otherwise use Publication Release Content in any way you do so solely at your own risk and without any representation or warranty whatsoever from TMO Group, its affiliates or its service providers.
- view and display the content on a computer screen;
- print individual pages on paper or make a reasonable number of photocopies (or both); and
- store the content in electronic form on your computer’s hard drive for your personal, non-commercial use only.
You must not copy, pass on, sell, publish or make profit from any of the content without first getting our written permission. The content includes a number of trademarks (including TMO Group) that are owned by us or our licensors. By making the trademarks available on the website, we are not giving you any permission to use them.
The content is only for general information, and we provide it as it becomes available. We take reasonable care to check that the content is accurate and complete before we publish it on the website. However, because we get the content from a number of different sources – and because of the issues involved with providing information through the Internet – we cannot guarantee that the content will always be accurate, available, complete or fit for any particular purpose.
We do not guarantee that the content is free from viruses, or that you will always be able to use the website without any interruption or error. If you download any content to your computer or take the content from the website in any other way, you do so at your own risk. We will not be responsible for any damage to your computer or any of the information on it.
We do not accept any responsibility for any mistakes, errors or other faults in the website and the content, or for how you use the website and the content.
However, nothing in these terms removes or limits our liability for death or personal injury caused by our negligence or for any liability which we cannot limit or exclude under the relevant law.
Links to Other Websites
The website may contain links or references to products, materials or websites provided by organisations that are independent from us (we call these “Third Parties”), either directly or through frames (for example, where two or more web pages are displayed as a single page). Although we may make this material available, we do not in any way recommend, endorse or promote it. If you have any complaints about the third-party material we make available, you should contact the relevant third party. You must not link to our website without first getting our written permission.
It may be possible, through other websites we run and provide links to from this website, for you to have access to a facility to services. Nothing on this or other websites we run forms an offer on our part to sell any services. How you buy and use services will depend on separate terms and conditions, and you may need to register with us or another organisation.
If any court having the appropriate authority finds that any of these terms are not valid, this will not affect the validity of any of the other terms in this notice. If you or we fail to take advantage of any right we have under these terms, it does not mean you or we are giving up that right.
We may make changes to any part of the website or the content (including these terms) at any time. We will tell you about any changes to these terms by showing the date of the changes in the “Last updated” section below. By using the website after the date we make any changes, you are agreeing to the changes.
Last updated: May 2018